钢制拖链|钢铝拖链|电缆拖链|塑料拖链|工程塑料|尼龙拖链

Welcome you to visit our company website!
Your present position:Home > 产品展示
CGP magnetic scraping plate type debris removal unit

CGP magnetic scraping plate type debris removal unit

A magnetic material layer is laid on the baseplate of CGP type magnetic scraping plate debris removal unit , which can pr vent the debris from settling down on the baseplate . In this way . debris will be scraped along the baseplate to the designated area .
CGP type magnetic series scraping plate debris removal unit offers wide selection of transmission speed and working range and is of high working efficiency and has variable debris removal width . It can provide you sufficient selection for use The height and distribution distance can be designed according to each specific machine . The actual removing amount of debris can be adjusted and controlled . Due to specially designed structure, each of the scraping plate of CGP type magnetic series scraping plate debris removal unit can work independently . In this way, debris will be scraped along the baseplate to the designated area . Therefore debris and cooling liquid will not stick to the scraping plate . This unit is suitable for removing powder debris produced heavy ?duty cutting machines or for pastry-like debris produced by sand grinder .
CGP type magnetic scraping plate debris removal unit is suitable for the transmission of ferrous materials , especially for settling down fine particles so that purifying the cooling solution and impurities shall be removed automatically .

 

Overall Dimensions Drawing of CGP magnetic scraping plate type debris removal unit

Technical parameters

Water Tank Technical Parameters

Name

Length of Water tank

Width of Water tank

Height of Water tank

Flowrate of cooling pump

Dimensions

 

 

 

 

 

 

 

 

Note:
( 1 ) Motor power can be determined by the effective width of debris removal B2
Levelness L1 , and lifting height H.
( 2 ) If the pitch of the chain plate is different , the height of different cases H1 . Shall be different as well.
Pitch 31.75mm Min height of the case H 1, 100mm ;
Pitch 38.1mm Min height of the case H 1, 135mm ;
Pitch 50.8mm Min height of the case H 1, 180mm ;
Pitch 63.5mm Min height of the case H 1, 230mm ;
Pitch101.6mm Min height of the case H 1, 260mm ;
( 3 ) The overall dimensions of the water tank can be made in different appearances acccording to the client requirement.
( 4 ) It can be designed and fabricated according to the client requirement

Cangzhou Dongjun Machinery parts Co., Ltd. Sales Department Tel:86-0317-5280059 Fax:86-0317-5673908 E-mail: annie@dongjunmachinery.com
Website:http://www.dongjunmachinery.com Address:Dongguan Industrial Park, the old town of Cangxian